Introduction
When you’re building a new home, the excavation process can be complex. There are many steps involved, and each one is crucial for the success of your project. To help you get started, here’s our guide to excavating for a new home:
Choosing A Site
When choosing a site, make sure it’s flat and level. You don’t want your home to have significant elevation changes that could cause structural issues with the foundation or even cracks in the walls. Also decide if you want your home to be accessible by car; if so, make sure there’s enough room for vehicles to park outside of it.
Not all sites are created equal when talking about drainage; some will have better drainage than others due to the type of soil they’re built on (for example, sandy soil drains better than clay). It’s important that your site has good drainage so it doesn’t become waterlogged over time and cause any damage from flooding or other issues related to being damp all the time.
Finally, check if any nearby infrastructure such as water lines may interfere with building plans for your new home site; this includes pipes and wires running underground near where you plan on constructing foundations for houses or other buildings such as garages
Identify The Right Equipment
There are many factors to consider when choosing excavation equipment, but the most important is its size. Depending on your needs and the size of your project, you may need to rent or buy a large piece of machinery. When looking for excavators in Brisbane, keep these tips in mind:
- Consider how much power you will need to perform tasks such as digging up large amounts of earth or breaking up concrete. The larger pieces of equipment can do both jobs with ease!
- Ask about warranty terms for fuel tanks and other parts of the machine so that you don’t get stuck with extra costs later on if something breaks down unexpectedly.
- Make sure that there’s plenty of space available where these machines can be stored safely after use so that no one gets hurt by them falling over from being improperly secured during storage time periods between jobs – this could save lives too!
Prepare The Land For Excavation
The first step to successfully excavating your new home is to prepare the land for excavation. This involves removing trees and shrubs, rocks and debris, grass, weeds, and soil. You want as much space available for digging as you can get, so make sure that the site is level and free of obstructions before you begin this process. The more you remove from the area before digging begins, the less time it will take while digging is going on.
Roofing
Roofing is one of the last steps in building a new home, and it often goes unappreciated. It’s important to realize that while your roof won’t cost much more than a few thousand dollars, it can be the difference between a comfortable and safe environment where you can live and enjoy life and an unsafe house with leaks that cause mold growth and damage to walls and ceilings.
Roofing is expensive because it needs to be done well. The roof will protect your family from rain, snow, and sunburns (in areas where there are summer storms), as well as other weather-related hazards like lightning strikes or hail stones that could damage windows or door frames if not properly protected by sealing off cracks with caulking material such as silicone caulk before installing aluminium flashings onto existing frame structures above doors or windows below eaves lines.
Fencing
You’ll need to install a fence like this colorbond fencing in Perth around the excavation site. This will keep people and animals out and also prevent stray rocks from falling into the hole as you dig deeper. It’s also a good idea to install signs warning of possible hazards such as flooded basements or underground utilities.
You can use temporary fencing for now, but it’s likely that you’ll want permanent fencing around your home once it’s complete. In general:
- Temporary fences should be strong enough to withstand heavy equipment and vehicles that may drive over them during construction.
- Permanent fences should be finished with wood or metal posts (not plastic) spaced 6 feet apart so they can hold up against snow loads during winter months without sagging into your yard; they should also be at least 6 feet tall so children cannot climb over them.
Excavation Contractors
Finding an excavating contractor with experience like this Darren loftus building & construction can be a daunting task. There are many factors that go into choosing the right contractor, and it’s important to do your research before you sign on the dotted line.
It’s important to find an excavator who is licensed and insured. It should be easy enough to check this information online or by calling your city’s licensing department or municipality’s building inspection office. Make sure they have all their certifications up-to-date too! You don’t want them doing any work without proper training or credentials.
Next, consider how long they’ve been in business for and how much experience they have working on projects similar to yours (i.e., houses). If possible, make sure they’re familiar with local building codes as well as national standards so that there are no surprises during construction later down the line (and no delays!).
Contact The Utility Companies
After you’ve completed the survey, it’s time to contact the utility companies. The last thing you want is for them to dig up your house while digging their own lines. Call each company and make sure they know that you’ll be digging in the area where their lines are located. Ask them if they have any plans to work in your neighborhood, and request a schedule so that you can plan when they will be out of your way.
By following these steps, you will make the excavation experience for your new home much easier.
- The first thing you should do is to contact the utility companies that serve your area and let them know about your plans for a new home. This will ensure that there are no surprises when it comes time for excavation, as well as help keep you from digging up something important or damaging it in any way.
- Once you have secured a contractor, the process of excavation can begin! Excavation involves digging out the land where your house will be built so that foundations can be laid and facilities connected, like gas pipes and water lines (to name just a few). Although this sounds simple enough on paper, there are several important things to consider:
- measuring ground levels before starting work;
- digging down further than necessary if necessary (for example if there’s existing utility lines under ground);
- keeping track of how much dirt has been removed so far;
- After making sure everything is cleanly disposed off at the end of each day:
Conclusion
Excavation is a key part of the home-building process, but it can be confusing if you don’t know what to expect. That’s why we’ve written this article to help explain everything from the basics of excavation to how it fits into the overall construction process. If you have any questions about excavating for your new home, please contact one of our experts today!
